{"id":8926,"date":"2024-01-22T12:00:48","date_gmt":"2024-01-22T10:00:48","guid":{"rendered":"https:\/\/www.fly-air3.com\/?page_id=8926"},"modified":"2026-05-18T12:49:30","modified_gmt":"2026-05-18T10:49:30","slug":"preferences4","status":"publish","type":"page","link":"https:\/\/www.fly-air3.com\/fr\/support\/air3-xctrack-manual\/xctrack-manual\/preferences4\/","title":{"rendered":"Preferences (4)"},"content":{"rendered":"
Manuel XCTrack Pro - Page principale<\/a><\/div>\n\n\n\n

<\/p>\n\n\n\n

Cette page d\u00e9crit plusieurs sous-sections du menu Preferences de XCTrack. Consultez les autres sections pour en savoir plus sur les diff\u00e9rentes fonctionnalit\u00e9s de XCTrack.<\/p>\n\n\n

<\/div>
\n
\n\t\t\"\"\n\t<\/div>\n\n<\/div><\/div><\/div>
<\/div><\/div>
<\/div>
<\/div><\/div><\/div>\n\n\n

Des vid\u00e9os ont \u00e9t\u00e9 produites pour expliquer les diff\u00e9rentes fonctionnalit\u00e9s de XCTrack Pro. Lisez la page vid\u00e9os tuto<\/a> pour apprendre rapidement comment utiliser XCTrack Pro. <\/p>\n\n\n\n

<\/p>\n\n\n\n

Cliquez sur le signe + pour lire les d\u00e9tails.<\/p>\n\n\n\n

<\/p>\n\n\n

<\/span>Connexion et Capteurs<\/div>
\n\n\n
\n
\n\t

AIR\u00b3 est \u00e9quip\u00e9 d'un GPS pr\u00e9cis et d'un puissant capteur de pression.<\/p>\n

Nous recommandons de toujours utiliser le capteur de pression interne tr\u00e8s performant de l'AIR\u00b3.\u00a0Regardez et \u00e9coutez les vid\u00e9os comparant le vario AIR\u00b3 et d'autres instruments de vol.<\/a><\/p>\n

Cependant, vous avez toujours la possibilit\u00e9 de connecter un capteur externe.<\/p>\n<\/div>\n<\/div><\/div><\/div><\/div>

\n
\n\t

ATTENTION : Conformit\u00e9 FAI CIVL<\/strong><\/p>\n

Notez que si vous utilisez un capteur externe pour les donn\u00e9es GPS et\/ou de pression, vous ne suivez pas les r\u00e8gles CIVL de la FAI et votre fichier IGC ne sera pas conforme \u00e0 la FAI.<\/p>\n

Une fois que vous avez connect\u00e9 un capteur externe (GPS et\/ou pression), vous pouvez choisir le capteur qui a la priorit\u00e9 la plus \u00e9lev\u00e9e (voir ci-dessous).<\/p>\n

Si vous utilisez un capteur externe avec une priorit\u00e9 plus \u00e9lev\u00e9e que le capteur interne, votre fichier IGC ne sera pas conforme \u00e0 la FAI.<\/p>\n

If you have both an internal sensor and a lower priority external sensor enabled, your IGC should be FAI compliant. However, if your internal sensor has a temporary problem (no GPS reception) for more than 30 seconds, XCTrack will try to use the secondary (external) sensor. In this case your IGC file will not be FAI compliant. If it is important for you to have a valid FAI-compliant IGC file, it is recommended that you enable only internal sensors for GPS and pressure data, and check that your settings meet FAI CIVL requirements. Note that you must obtain a GPS position (good satellite reception) to validate your use of internal GPS.<\/p>\n

Read more about the use of several sensors and their priority below.<\/p>\n

Read also more details about the Param\u00e8tres capteur<\/a> dans le sous-section Boutons d'action<\/a> du Manuel XCTrack Pro Widgets<\/a><\/p>\n

 <\/p>\n<\/div>\n<\/div><\/div><\/div>

\n
\n\t\t\"\"\n\t<\/div>\n\n<\/div><\/div>
\n
\n\t\t\"\"\n\t<\/div>\n\n<\/div><\/div><\/div><\/div>
\n
\n\t

Connection<\/strong><\/h3>\n

Internal Sensors<\/strong><\/p>\n

First, select which data will be provided to XCTrack as internal sensors. Click on the 3 dots to the right, then click Properties to open the Internal Sensors selection page.<\/p>\n

Disable the sensors you do not want to use as internal sensors.<\/p>\n

Compass Usage: Please see below for special notes on using the internal compass versus the heading calculated by XCTrack based on bearing and wind. If you are using the internal compass, don’t forget to calibrate it by making big 8.<\/p>\n

To use the internal Fanet\/Flarm module of the AIR\u00b3+ version, enable “Fanet\/Flarm data”. Note that the internal Fanet\/Flarm module should only be activated by either XCTrack OR XC Guide, not by both applications.\u00a0More details about the activation of the Fanet\/Flarm\u00a0 module with XC Guide ici<\/a>.<\/p>\n

Should you need to calibrate the internal pressure sensor, click on “Baro Calibration”.<\/p>\n

To know more about GPS TIME FIX, read below this specific feature.<\/p>\n

 <\/p>\n<\/div>\n<\/div><\/div><\/div>

\n
\n\t\t\"\"\n\t<\/div>\n\n<\/div><\/div>
\n
\n\t\t\"\"\n\t<\/div>\n\n<\/div><\/div><\/div><\/div>
\n
\n\t

External sensors<\/strong><\/p>\n

If you want to use an external sensor, first click “ADD” and then select the type of sensor you want to connect.<\/p>\n<\/div>\n<\/div><\/div><\/div>

\n
\n\t\t\"\"\n\t<\/div>\n\n<\/div><\/div>
\n
\n\t\t\"\"\n\t<\/div>\n\n<\/div><\/div><\/div><\/div>
\n
\n\t

If you select a Bluetooth sensor and Bluetooth is not enabled on your device, XCTrack will ask you to be allowed to enable Bluetooth.<\/p>\n

XCTrack will then list the different devices that have been paired and the available Bluetooth sources. If you haven’t paired the device yet with the AIR\u00b3, pair it before selecting it.<\/p>\n<\/div>\n<\/div><\/div><\/div>

\n
\n\t\t\"\"\n\t<\/div>\n\n<\/div><\/div>
\n
\n\t\t\"\"\n\t<\/div>\n\n<\/div><\/div><\/div><\/div>
\n
\n\t

Once the new sensor is selected, click on the 3 dots and select “Properties” to select what data is available from this new sensor. Keep what you need activated with this sensor.<\/p>\n

If you have multiple sensors connected for the same function, you can sort the priorities. Be aware of FAI CIVL compliance as mentioned above.<\/p>\n

 <\/p>\n<\/div>\n<\/div><\/div><\/div>

\n
\n\t\t\"\"\n\t<\/div>\n\n<\/div><\/div>
\n
\n\t\t\"\"\n\t<\/div>\n\n<\/div><\/div><\/div><\/div>
\n
\n\t

Color dot indicates connection status: red disconnected, green connected.<\/p>\n

Within the list of available data for a specific sensor, you can identify if XCTrack receives data when the name is bold. If the name is bold and green, this means that XCTrack also uses the data from this sensor.<\/p>\n

With this following example, XCTrack is connected to the sensor (Green dot), receives data from GPS (bold) but doesn’t use it (not green), receives and uses the data from Baro and Fanet\/Flarm (bold and green).<\/p>\n

\"\"<\/p>\n<\/div>\n<\/div><\/div><\/div>

\n
\n\t\t\"\"\n\t<\/div>\n\n<\/div><\/div>
\n
\n\t\t\"\"\n\t<\/div>\n\n<\/div><\/div><\/div><\/div>
\n
\n\t

XCTrack peut analyser les cha\u00eenes Flarm ($PFLAA) et Fanet ($FNNGB).<\/p>\n

Lisez plus de d\u00e9tails sur la fa\u00e7on d'utiliser XC Guide comme capteur externe TCP dans la page sp\u00e9cificit\u00e9s XC Guide pour AIR\u00b3<\/a>, fournissant \u00e0 XCTrack diff\u00e9rentes informations pouvant \u00eatre affich\u00e9es sur la carte XCTrack.<\/p>\n

Don’t forget to enable “Fanet\/Flarm data” as available data in the TCP client properties so that XCTrack understands the information provided by XC Guide.<\/p>\n

 <\/p>\n

Une fois que vous avez activ\u00e9 un capteur externe, v\u00e9rifiez Barre d'\u00e9tat<\/a> pour s'assurer qu'il fonctionne correctement.<\/p>\n<\/div>\n<\/div><\/div><\/div>

\n
\n\t\t\"\"\n\t<\/div>\n\n<\/div><\/div><\/div><\/div>
\n
\n\t

FANET\/FLARM<\/strong><\/p>\n

AIR\u00b3+ includes a FANET\/FLARM module allowing XCTrack to transmit and receive data to FANET and FLARM devices.<\/p>\n

Once the module is enabled, XCTrack communicates witht the module in order to display the validity of the Flarm licence and the Flarm\/Fanet id. Check how to freely upgrade the FLARM licence through XC Guide in the page des fonctionnalit\u00e9s d'XC Guide sp\u00e9cifiques \u00e0 l'AIR\u00b3<\/a>.<\/p>\n

Once you have activated the FANET\/FLARM module, check the Barre d'\u00e9tat<\/a> pour s'assurer qu'il fonctionne correctement.<\/p>\n

\"\"<\/p>\n<\/div>\n<\/div><\/div><\/div>

\n
\n\t\t\"\"\n\t<\/div>\n\n<\/div><\/div><\/div><\/div>
\n
\n\t

GPS<\/strong><\/p>\n

La fonction de correction de l'heure GPS est disponible pour r\u00e9soudre le bogue de roulement du num\u00e9ro de semaine GPS.<\/p>\n

Cliquez simplement sur le bouton pour l'utiliser.<\/p>\n<\/div>\n<\/div><\/div><\/div>

\n
\n\t\t\"\"\n\t<\/div>\n\n<\/div><\/div><\/div><\/div>
\n
\n\t

Assurez-vous d'obtenir un signal GPS et une connexion Internet.<\/p>\n<\/div>\n<\/div><\/div><\/div>

\n
\n\t\t\"\"\n\t<\/div>\n\n<\/div><\/div><\/div><\/div>
\n
\n\t

L'heure obtenue du GPS peut ne pas \u00eatre correcte en raison d'un ancien firmware (buggu\u00e9). Pour la v\u00e9rification, une connexion Internet (pour obtenir l'heure exacte du serveur de temps) et la r\u00e9ception du signal GPS sont n\u00e9cessaires en m\u00eame temps. Vous pouvez corriger le temps gps incorrect si la diff\u00e9rence est sup\u00e9rieure \u00e0 1 minute. Une trace avec une heure GPS corrig\u00e9e est valide pour XContest, mais n'est pas conforme aux r\u00e8gles FAI CIVL (non \u00e9ligible pour les comp\u00e9titions de niveau FAI 1 et les r\u00e9clamations de records officiels).<\/p>\n<\/div>\n<\/div><\/div><\/div>

\n
\n\t\t\"\"\n\t<\/div>\n\n<\/div><\/div><\/div><\/div>
\n
\n\t

Vent et vitesse air<\/strong><\/p>\n

By default, XCTrack computes the wind (speed and direction) during thermalling. From wind and ground speed XCTrack estimates the airspeed.<\/p>\n

External devices can provide these values to XCTrack. When Airspeed and\/or “Wind speed and direction” is\/are enabled, XCTrack will used these data instead of the computed ones. XCTrack will just grab the values provided by the external instrument.<\/p>\n

Certains p\u00e9riph\u00e9riques externes donnent la direction du vent de mani\u00e8re oppos\u00e9e. Vous pouvez inverser la direction du vent en s\u00e9lectionnant \u00abFaire pivoter la direction du vent de 180 degr\u00e9s\u00bb.<\/p>\n<\/div>\n<\/div><\/div><\/div>

\n
\n\t\t\"\"\n\t<\/div>\n\n<\/div><\/div><\/div><\/div>
\n
\n\t

Boussole<\/strong><\/p>\n

Par d\u00e9faut, XCTrack utilise la direction de la trajectoire de la trace gr\u00e2ce au GPS, la vitesse et la direction du vent pour calculer la direction du cap.<\/p>\n

By enabling \u201cCompass\u201d in the internal sensors or in an external sensor, XCTrack will use the information coming from such sensor to display the Heading, instead of that computed Heading.<\/p>\n

Note that the Compass usually provides heading information with some small delay, while the Heading calculated from wind and ground speed is almost instantaneous. Therefore, you may see some delay while themalling. Prefer the computed Heading unless you have a good reason to not do so.<\/p>\n

Les deux widgets\u00a0Boussole \u00e9lectronique<\/a> et \u00ab\u00a0Boussole et vent\u00a0\u00bb\u00a0<\/a>dans le page navigation<\/a> du\u00a0Manuel XCTrack Pro Widgets<\/a>\u00a0sont influenc\u00e9s par ce r\u00e9glage.<\/p>\n

Pour chaque widget affichant une carte, comme le Widget Assistant Thermique dans la page Air<\/a>, le Widget carte XC de la page Xcontest<\/a> et du Widget Carte de la t\u00e2che de la page Comp\u00e9tition<\/a> du Manuel XCTrack Pro Widgets<\/a>, la fl\u00e8che pilote correspond au Cap, tandis que la ligne continue devant correspond \u00e0 la trajectoire. Pour chacun de ces widgets, vous pouvez augmenter la taille de la fl\u00e8che Pilote afin d'identifier clairement la diff\u00e9rence entre la trajectoire et le Cap. En activant \"Utiliser la boussole interne\", vous utiliserez la boussole interne pour le cap au lieu du cap calcul\u00e9 en fonction du vent.<\/p>\n<\/div>\n<\/div><\/div><\/div><\/div>

\n
\n\t\t\"\"\n\t<\/div>\n\n<\/div><\/div><\/div><\/div>
\n
\n\t

To use the internal compass, you need to calibrate it.<\/p>\n

If it is not calibrated, XCTrack will warn you and will indicate the percentage of calibration. You can calibrate the internal compass by making 8-like figures to improve calibration.
\nOnce calibrated, XCTrack indicates \u201cCompass is calibrated”<\/p>\n

 <\/p>\n<\/div>\n<\/div><\/div><\/div>

\n
\n\t\t\"\"\n\t<\/div>\n\n<\/div><\/div><\/div><\/div>
\n
\n\t
\n

 <\/p>\n<\/div>\n<\/div><\/div><\/div><\/div>

\n
\n\t

Capteur de pression atmosph\u00e9rique<\/strong><\/p>\n

Si vous avez connect\u00e9 un appareil externe avec un capteur de pression, vous pouvez choisir si vous souhaitez utiliser le barom\u00e8tre interne ou externe.<\/p>\n

Read above the consequence on FAI CIVL compliance above if you are using an external sensor.<\/p>\n

Si vous avez activ\u00e9 le barom\u00e8tre externe et qu'il n'y a pas de donn\u00e9es de baro disponibles, XCTrack vous avertira avec le son<\/a> sauf si vous avez d\u00e9sactiv\u00e9 cette option dans Menu\/Pr\u00e9f\u00e9rences\/Son\/Vario sonore<\/a>.<\/p>\n<\/div>\n<\/div><\/div><\/div>

\n
\n\t\t\"\"\n\t<\/div>\n\n<\/div><\/div><\/div><\/div>
\n
\n\t

Baro Calibration (pressure sensor)<\/strong><\/p>\n

Choisissez Baro Calibration<\/strong> to calibrate the baro sensor.<\/p>\n

Pression<\/strong> affiche les informations directes fournies par le capteur en Pa. Juste en dessous de la pression, la fr\u00e9quence des informations de pression re\u00e7ues par XCTrack par seconde.<\/p>\n

Altitude<\/strong> est la conversion directe de la pression standard en altitude. La deuxi\u00e8me valeur est la valeur moyenne et la variante calcul\u00e9es \u00e0 partir des valeurs brutes des 20 derni\u00e8res secondes.<\/p>\n

Le curseur Lissage<\/strong> vous permet d'appliquer un filtre Low pass<\/a> sur les donn\u00e9es pour \u00e9viter de prendre en compte des donn\u00e9es provenant du capteur qui ne sont pas coh\u00e9rentes. La valeur correspond au poids du filtre Low pass (en diminuant le nombre, vous limitez les \u00e9ventuelles mauvaises valeurs, mais vous limitez \u00e9galement la sensibilit\u00e9 vario en cas de grosse diff\u00e9rence de pression r\u00e9elle).<\/p>\n

Taux de mont\u00e9e<\/strong> est la diff\u00e9rence d'altitude r\u00e9sultante par seconde calcul\u00e9e apr\u00e8s le lissage.<\/p>\n<\/div>\n<\/div><\/div><\/div>

\n
\n\t\t\"\"\n\t<\/div>\n\n<\/div><\/div><\/div><\/div>
\n
\n\t

vario sonore<\/strong><\/p>\n

Entrez directement dans le menu vario acoustique (voir aussi Menu\/Pr\u00e9f\u00e9rences\/Son\/vario acoustique expliqu\u00e9 dans la section Son ci-dessus).<\/p>\n

 <\/p>\n<\/div>\n<\/div><\/div><\/div>

\n
\n\t\t\"\"\n\t<\/div>\n\n<\/div><\/div><\/div><\/div><\/div>\n\n<\/div><\/div>\n<\/div>\n\n\n\n

<\/p>\n\n\n

<\/span>Export & import config<\/div>
\n\n\n
\n
\n\t

Nouvelle fonctionnalit\u00e9 \u00e0 partir de XCTrack 0.9.8.7<\/p>\n

Cette fonctionnalit\u00e9 dans les versions pr\u00e9c\u00e9dentes \u00e9tait situ\u00e9e dans Menu\/Pr\u00e9f\u00e9rences\/Tests & D\u00e9bogage\/Configuration. Il permettait uniquement \u00e0 l'utilisateur d'exporter l'ensemble de la configuration et de l'importer. Souvent, les utilisateurs importaient toute la configuration pour obtenir une mise en page diff\u00e9rente, mais ne se rendaient pas compte que toute la configuration \u00e9tait import\u00e9e. Cela a g\u00e9n\u00e9r\u00e9 de nombreux probl\u00e8mes tels que les param\u00e8tres du capteur externe, les param\u00e8tres sonores sp\u00e9cifiques, etc.<\/p>\n

Avec cette nouvelle fonctionnalit\u00e9, il est d\u00e9sormais possible d'exporter uniquement les pages et de d\u00e9cider quoi faire lors de son importation. \u00c0 moins que la configuration ne provienne du m\u00eame appareil, il est fortement recommand\u00e9 de n'exporter et d'importer que les pages. Pas le reste de la configuration.<\/p>\n

 <\/p>\n<\/div>\n<\/div><\/div><\/div>

\n
\n\t\t\"\"\n\t<\/div>\n\n<\/div><\/div><\/div><\/div>
\n
\n\t

Lorsque vous entrez dans le menu, vous pouvez choisir d'exporter votre configuration ou d'importer une configuration.<\/p>\n

 <\/p>\n

 <\/p>\n<\/div>\n<\/div><\/div><\/div>

\n
\n\t\t\"\"\n\t<\/div>\n\n<\/div><\/div><\/div><\/div>

Exporter la configuration<\/h3>\n
\n\t<\/div>\n<\/div><\/div><\/div><\/div>
\n
\n\t\t\"\"\n\t<\/div>\n\n<\/div><\/div>
\n
\n\t

Choisissez si vous souhaitez exporter uniquement les pages ou l'ensemble de la configuration.<\/p>\n

Dans les deux cas, le fichier export\u00e9 sera situ\u00e9 dans le sous-dossier Config de XCTrack.<\/p>\n

 <\/p>\n

 <\/p>\n<\/div>\n<\/div><\/div><\/div>

\n
\n\t\t\"\"\n\t<\/div>\n\n<\/div><\/div>
\n
\n\t

Si vous avez choisi d'exporter uniquement les pages, le nom du fichier export\u00e9 contiendra \u00ab\u00a0pages\u00a0\u00bb. Une fois export\u00e9, vous pouvez cliquer sur le bouton \u00ab partager \u00bb pour envoyer directement vos fichiers \u00e0 la personne souhait\u00e9e. Vous pouvez par exemple l'envoyer avec Whatsapp, Gmail, Messenger ou toute autre application que vous auriez install\u00e9e.<\/p>\n

 <\/p>\n

 <\/p>\n<\/div>\n<\/div><\/div><\/div>

\n
\n\t\t\"\"\n\t<\/div>\n\n<\/div><\/div>
\n
\n\t

Si vous avez choisi d'exporter toute la configuration, le nom du fichier export\u00e9 contiendra \u00ab backup \u00bb. Une fois export\u00e9, vous pouvez cliquer sur le bouton \u00ab partager \u00bb pour envoyer directement vos fichiers \u00e0 la personne souhait\u00e9e. Vous pouvez par exemple l'envoyer avec Whatsapp, Gmail, Messenger ou toute autre application que vous auriez install\u00e9e.<\/p>\n

 <\/p>\n

 <\/p>\n<\/div>\n<\/div><\/div><\/div><\/div>

Importer la configuration<\/h3>\n
\n\t<\/div>\n<\/div><\/div><\/div><\/div>
\n
\n\t\t\"\"\n\t<\/div>\n\n<\/div><\/div>
\n
\n\t

Si vous cliquez sur Importer la configuration, XCTrack v\u00e9rifiera s'il existe un fichier de configuration dans le sous-dossier Config de XCTrack.<\/p>\n

S\u00e9lectionnez le fichier que vous souhaitez importer. Si votre fichier de configuration ne se trouve pas dans le sous-dossier Config de XCTrack, cliquez sur \"Autre\" et s\u00e9lectionnez le fichier o\u00f9 il se trouve.<\/p>\n

 <\/p>\n

 <\/p>\n<\/div>\n<\/div><\/div><\/div>

\n
\n\t\t\"\"\n\t<\/div>\n\n<\/div><\/div>
\n
\n\t

Si vous avez s\u00e9lectionn\u00e9 un fichier de configuration avec des pages uniquement, la premi\u00e8re option est d\u00e9sactiv\u00e9e. Vous pouvez choisir de remplacer les pages par celles qui sont incluses dans le fichier de configuration, ou d'ajouter ces pages.<\/p>\n

 <\/p>\n

 <\/p>\n<\/div>\n<\/div><\/div><\/div>

\n
\n\t\t\"\"\n\t<\/div>\n\n<\/div><\/div>
\n
\n\t

Si vous avez s\u00e9lectionn\u00e9 un fichier de configuration avec toute la configuration, vous avez 3 options. Vous pouvez choisir de remplacer toutes les pages et tous les param\u00e8tres de XCTrack. Cela \u00e9crasera tout. La deuxi\u00e8me option consiste \u00e0 remplacer les pages uniquement par celles qui sont incluses dans le fichier de configuration. La troisi\u00e8me option consiste \u00e0 ajouter les pages \u00e0 celles que vous avez actuellement.<\/p>\n

 <\/p>\n

 <\/p>\n<\/div>\n<\/div><\/div><\/div><\/div>

\n
\n\t\t\"\"\n\t<\/div>\n\n<\/div><\/div>
\n
\n\t

En rempla\u00e7ant tout, toutes les configurations personnalis\u00e9es seront r\u00e9initialis\u00e9es.<\/p>\n

 <\/p>\n

 <\/p>\n<\/div>\n<\/div><\/div><\/div>

\n
\n\t\t\"\"\n\t<\/div>\n\n<\/div><\/div>
\n
\n\t

Si vous choisissez de remplacer uniquement les pages, vos pages seront remplac\u00e9es. Les autres configurations ne seront pas modifi\u00e9es.<\/p>\n

 <\/p>\n

 <\/p>\n<\/div>\n<\/div><\/div><\/div>

\n
\n\t\t\"\"\n\t<\/div>\n\n<\/div><\/div>
\n
\n\t

Si vous choisissez d'ajouter des pages, rien ne sera \u00e9cras\u00e9.<\/p>\n

 <\/p>\n

 <\/p>\n<\/div>\n<\/div><\/div><\/div><\/div><\/div>\n\n<\/div><\/div>\n<\/div>\n\n\n\n

<\/p>\n\n\n

<\/span>Int\u00e9gration Android<\/div>
\n\n\n
\n
\n\t

La plupart des fonctionnalit\u00e9s indiqu\u00e9es dans cette section sont auto-expliqu\u00e9es.<\/p>\n

Enable HW acceleration<\/strong>
With HW acceleration enabled drawing graphics should be faster and more battery friendly.<\/p>\n

Some webpages (especially with maps) might not work without it. However on some devices it leads to occasional crashes or frozen maps.<\/p>\n

Try to disable this option if a crash occurs. XCTrack must be restarted for this option to have effect.<\/p>\n

Announce events by intents<\/strong>
Allow the app to broadcast flight events (e.g. takeoff, landing). The AIR\u00b3 XCT Addon<\/a> heavily relies on events sent by XCTrack. Make sure this option is enabled so that AIR\u00b3 XCT Addon can properly respond to these intents.<\/p>\n

 <\/p>\n<\/div>\n<\/div><\/div><\/div>

\n
\n\t\t\"\"\n\t<\/div>\n\n<\/div><\/div><\/div><\/div><\/div>\n\n<\/div><\/div>\n<\/div>\n\n\n\n

<\/p>\n\n\n

<\/span>Test et d\u00e9boguage<\/div>
\n\n\n
\n
\n\t

La section Test et d\u00e9bogage est principalement utilis\u00e9e pour les utilisateurs avanc\u00e9s. La plupart des fonctionnalit\u00e9s sont auto-expliqu\u00e9es.<\/p>\n

Configuration<\/strong><\/p>\n

\u00c0 partir de XCTrack 0.9.8.7, les fonctionnalit\u00e9s d'exportation et d'importation de la configuration sont situ\u00e9es dans Menu\/Pr\u00e9f\u00e9rences\/'export et import de la config.<\/p>\n<\/div>\n<\/div><\/div><\/div>

\n
\n\t\t\"\"\n\t<\/div>\n\n<\/div><\/div><\/div><\/div><\/div>\n\n<\/div><\/div>\n<\/div>\n\n\n\n

<\/p>\n\n\n

<\/span>Abonnement et Pro<\/div>
\n\n\n
\n
\n\t

AIR\u00b3 est fourni avec une licence perp\u00e9tuelle de XCTrack Pro. La licence est li\u00e9e \u00e0 l'instrument et non au pilote.<\/p>\n

Si vous aimez XCTrack, envisagez de soutenir le d\u00e9veloppement avec une petite somme d'argent. Cliquez sur \u00abFaire un don\u00bb et suivez les \u00e9tapes.<\/p>\n

Notez que si vous souhaitez vous abonner pour obtenir la version Pro sur un autre appareil, l'abonnement sera li\u00e9 au pilote. Assurez-vous que vos informations d'identification sont correctement saisies dans la section Pilote (voir ci-dessus).<\/p>\n

XCTrack Pro contient de nombreuses fonctionnalit\u00e9s qui ne sont pas disponibles dans XCTrack (standard)<\/a>. Il y aura de plus en plus de fonctionnalit\u00e9s suppl\u00e9mentaires disponibles pour la version Pro dans les prochaines versions. Ces nouvelles fonctionnalit\u00e9s seront disponibles pour les pilotes qui ont souscrit \u00e0 la version Pro via les mises \u00e0 niveau.<\/p>\n<\/div>\n<\/div><\/div><\/div>

\n
\n\t\t\"\"\n\t<\/div>\n\n<\/div><\/div><\/div><\/div>
\n
\n\t

Si vous utilisez XCTrack avec un autre instrument et souhaitez obtenir la version Pro, vous pouvez obtenir la version Pro en vous abonnant. V\u00e9rifiez vos informations d'identification dans la section Pilote d\u00e9taill\u00e9e ci-dessus (Menu\/Pr\u00e9f\u00e9rences\/Pilote).<\/p>\n<\/div>\n<\/div><\/div><\/div>

\n
\n\t\t\"\"\n\t<\/div>\n\n<\/div><\/div><\/div><\/div>
\n
\n\t

Chaque euro vous donne acc\u00e8s \u00e0 1 mois de XCTrack Pro.<\/p>\n<\/div>\n<\/div><\/div><\/div>

\n
\n\t\t\"\"\n\t<\/div>\n\n<\/div><\/div><\/div><\/div><\/div>\n\n<\/div><\/div>\n<\/div>\n\n\n\n

Section suivante<\/p>\n\n\n\n

Livetracking<\/a><\/div>","protected":false},"excerpt":{"rendered":"

This page describes several subsections of the Preferences menu of XCTrack. Check the other sections to learn more about the different features of XCTrack. Videos have been produced to explain the different features of XCTrack Pro. Check the videos tuto page to learn quickly how to use XCTrack Pro. Click on the + sign to En savoir plus surPreferences (4)<\/span>[…]<\/a><\/p>\n","protected":false},"author":1,"featured_media":4286,"parent":3523,"menu_order":4,"comment_status":"closed","ping_status":"closed","template":"","meta":{"footnotes":""},"class_list":["post-8926","page","type-page","status-publish","has-post-thumbnail","hentry"],"yoast_head":"\nMenu Preferences (4) - XCTrack Pro manual - AIR\u00b3 - Full details & description<\/title>\n<meta name=\"description\" content=\"XCTrack Pro Manual. This page describes the Preferences menu of XCTrack. Check the other sections to learn details about the menus and the widgets of XCTrack\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.fly-air3.com\/fr\/support\/air3-xctrack-manual\/xctrack-manual\/preferences4\/\" \/>\n<meta property=\"og:locale\" content=\"fr_FR\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Menu Preferences (4) - XCTrack Pro manual - AIR\u00b3 - Full details & description\" \/>\n<meta property=\"og:description\" content=\"XCTrack Pro Manual. This page describes the Preferences menu of XCTrack. Check the other sections to learn details about the menus and the widgets of XCTrack\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.fly-air3.com\/fr\/support\/air3-xctrack-manual\/xctrack-manual\/preferences4\/\" \/>\n<meta property=\"og:site_name\" content=\"AIR\u00b3\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/FLYAIRCUBE\/\" \/>\n<meta property=\"article:modified_time\" content=\"2026-05-18T10:49:30+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.fly-air3.com\/wp-content\/uploads\/sites\/15\/2020\/04\/XCTrack-Pro-Manual-logo3.png\" \/>\n\t<meta property=\"og:image:width\" content=\"1200\" \/>\n\t<meta property=\"og:image:height\" content=\"628\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/png\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Dur\u00e9e de lecture estim\u00e9e\" \/>\n\t<meta name=\"twitter:data1\" content=\"112 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.fly-air3.com\\\/support\\\/air3-xctrack-manual\\\/xctrack-manual\\\/preferences4\\\/\",\"url\":\"https:\\\/\\\/www.fly-air3.com\\\/support\\\/air3-xctrack-manual\\\/xctrack-manual\\\/preferences4\\\/\",\"name\":\"Menu Preferences (4) - XCTrack Pro manual - AIR\u00b3 - Full details & description\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.fly-air3.com\\\/en\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.fly-air3.com\\\/support\\\/air3-xctrack-manual\\\/xctrack-manual\\\/preferences4\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.fly-air3.com\\\/support\\\/air3-xctrack-manual\\\/xctrack-manual\\\/preferences4\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.fly-air3.com\\\/wp-content\\\/uploads\\\/sites\\\/15\\\/2020\\\/04\\\/XCTrack-Pro-Manual-logo3.png\",\"datePublished\":\"2024-01-22T10:00:48+00:00\",\"dateModified\":\"2026-05-18T10:49:30+00:00\",\"description\":\"XCTrack Pro Manual. This page describes the Preferences menu of XCTrack. Check the other sections to learn details about the menus and the widgets of XCTrack\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.fly-air3.com\\\/support\\\/air3-xctrack-manual\\\/xctrack-manual\\\/preferences4\\\/#breadcrumb\"},\"inLanguage\":\"fr-FR\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.fly-air3.com\\\/support\\\/air3-xctrack-manual\\\/xctrack-manual\\\/preferences4\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"fr-FR\",\"@id\":\"https:\\\/\\\/www.fly-air3.com\\\/support\\\/air3-xctrack-manual\\\/xctrack-manual\\\/preferences4\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.fly-air3.com\\\/wp-content\\\/uploads\\\/sites\\\/15\\\/2020\\\/04\\\/XCTrack-Pro-Manual-logo3.png\",\"contentUrl\":\"https:\\\/\\\/www.fly-air3.com\\\/wp-content\\\/uploads\\\/sites\\\/15\\\/2020\\\/04\\\/XCTrack-Pro-Manual-logo3.png\",\"width\":1200,\"height\":628,\"caption\":\"XCTrack Pro Manual for AIR\u00b3\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.fly-air3.com\\\/support\\\/air3-xctrack-manual\\\/xctrack-manual\\\/preferences4\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.fly-air3.com\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Support\",\"item\":\"https:\\\/\\\/www.fly-air3.com\\\/support\\\/\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"Air\u00b3 & XCTrack Pro Manual\",\"item\":\"https:\\\/\\\/www.fly-air3.com\\\/support\\\/air3-xctrack-manual\\\/\"},{\"@type\":\"ListItem\",\"position\":4,\"name\":\"XCTrack online Manual\",\"item\":\"https:\\\/\\\/www.fly-air3.com\\\/support\\\/air3-xctrack-manual\\\/xctrack-manual\\\/\"},{\"@type\":\"ListItem\",\"position\":5,\"name\":\"Preferences (4)\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.fly-air3.com\\\/en\\\/#website\",\"url\":\"https:\\\/\\\/www.fly-air3.com\\\/en\\\/\",\"name\":\"AIR\u00b3\",\"description\":\"All in one Rugged 7" Android New generation paragliding flight instrument. Vario GPS Livetracking\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.fly-air3.com\\\/en\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.fly-air3.com\\\/en\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"fr-FR\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.fly-air3.com\\\/en\\\/#organization\",\"name\":\"Berfon SPRL\",\"url\":\"https:\\\/\\\/www.fly-air3.com\\\/en\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"fr-FR\",\"@id\":\"https:\\\/\\\/www.fly-air3.com\\\/en\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"http:\\\/\\\/www.fly-air3.com\\\/wp-content\\\/uploads\\\/sites\\\/15\\\/2019\\\/04\\\/AIR\u00b3-CARRE_Logo.png\",\"contentUrl\":\"http:\\\/\\\/www.fly-air3.com\\\/wp-content\\\/uploads\\\/sites\\\/15\\\/2019\\\/04\\\/AIR\u00b3-CARRE_Logo.png\",\"width\":600,\"height\":600,\"caption\":\"Berfon SPRL\"},\"image\":{\"@id\":\"https:\\\/\\\/www.fly-air3.com\\\/en\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/FLYAIRCUBE\\\/\"]}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Menu Preferences (4) - XCTrack Pro manual - AIR\u00b3 - Full details & description","description":"XCTrack Pro Manual. This page describes the Preferences menu of XCTrack. Check the other sections to learn details about the menus and the widgets of XCTrack","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.fly-air3.com\/fr\/support\/air3-xctrack-manual\/xctrack-manual\/preferences4\/","og_locale":"fr_FR","og_type":"article","og_title":"Menu Preferences (4) - XCTrack Pro manual - AIR\u00b3 - Full details & description","og_description":"XCTrack Pro Manual. This page describes the Preferences menu of XCTrack. Check the other sections to learn details about the menus and the widgets of XCTrack","og_url":"https:\/\/www.fly-air3.com\/fr\/support\/air3-xctrack-manual\/xctrack-manual\/preferences4\/","og_site_name":"AIR\u00b3","article_publisher":"https:\/\/www.facebook.com\/FLYAIRCUBE\/","article_modified_time":"2026-05-18T10:49:30+00:00","og_image":[{"width":1200,"height":628,"url":"https:\/\/www.fly-air3.com\/wp-content\/uploads\/sites\/15\/2020\/04\/XCTrack-Pro-Manual-logo3.png","type":"image\/png"}],"twitter_card":"summary_large_image","twitter_misc":{"Dur\u00e9e de lecture estim\u00e9e":"112 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/www.fly-air3.com\/support\/air3-xctrack-manual\/xctrack-manual\/preferences4\/","url":"https:\/\/www.fly-air3.com\/support\/air3-xctrack-manual\/xctrack-manual\/preferences4\/","name":"Menu Preferences (4) - XCTrack Pro manual - AIR\u00b3 - Full details & description","isPartOf":{"@id":"https:\/\/www.fly-air3.com\/en\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.fly-air3.com\/support\/air3-xctrack-manual\/xctrack-manual\/preferences4\/#primaryimage"},"image":{"@id":"https:\/\/www.fly-air3.com\/support\/air3-xctrack-manual\/xctrack-manual\/preferences4\/#primaryimage"},"thumbnailUrl":"https:\/\/www.fly-air3.com\/wp-content\/uploads\/sites\/15\/2020\/04\/XCTrack-Pro-Manual-logo3.png","datePublished":"2024-01-22T10:00:48+00:00","dateModified":"2026-05-18T10:49:30+00:00","description":"XCTrack Pro Manual. This page describes the Preferences menu of XCTrack. Check the other sections to learn details about the menus and the widgets of XCTrack","breadcrumb":{"@id":"https:\/\/www.fly-air3.com\/support\/air3-xctrack-manual\/xctrack-manual\/preferences4\/#breadcrumb"},"inLanguage":"fr-FR","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.fly-air3.com\/support\/air3-xctrack-manual\/xctrack-manual\/preferences4\/"]}]},{"@type":"ImageObject","inLanguage":"fr-FR","@id":"https:\/\/www.fly-air3.com\/support\/air3-xctrack-manual\/xctrack-manual\/preferences4\/#primaryimage","url":"https:\/\/www.fly-air3.com\/wp-content\/uploads\/sites\/15\/2020\/04\/XCTrack-Pro-Manual-logo3.png","contentUrl":"https:\/\/www.fly-air3.com\/wp-content\/uploads\/sites\/15\/2020\/04\/XCTrack-Pro-Manual-logo3.png","width":1200,"height":628,"caption":"XCTrack Pro Manual for AIR\u00b3"},{"@type":"BreadcrumbList","@id":"https:\/\/www.fly-air3.com\/support\/air3-xctrack-manual\/xctrack-manual\/preferences4\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.fly-air3.com\/"},{"@type":"ListItem","position":2,"name":"Support","item":"https:\/\/www.fly-air3.com\/support\/"},{"@type":"ListItem","position":3,"name":"Air\u00b3 & XCTrack Pro Manual","item":"https:\/\/www.fly-air3.com\/support\/air3-xctrack-manual\/"},{"@type":"ListItem","position":4,"name":"XCTrack online Manual","item":"https:\/\/www.fly-air3.com\/support\/air3-xctrack-manual\/xctrack-manual\/"},{"@type":"ListItem","position":5,"name":"Preferences (4)"}]},{"@type":"WebSite","@id":"https:\/\/www.fly-air3.com\/en\/#website","url":"https:\/\/www.fly-air3.com\/en\/","name":"AIR\u00b3","description":"All in one Rugged 7" Android New generation paragliding flight instrument. Vario GPS Livetracking","publisher":{"@id":"https:\/\/www.fly-air3.com\/en\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.fly-air3.com\/en\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"fr-FR"},{"@type":"Organization","@id":"https:\/\/www.fly-air3.com\/en\/#organization","name":"Berfon SPRL","url":"https:\/\/www.fly-air3.com\/en\/","logo":{"@type":"ImageObject","inLanguage":"fr-FR","@id":"https:\/\/www.fly-air3.com\/en\/#\/schema\/logo\/image\/","url":"http:\/\/www.fly-air3.com\/wp-content\/uploads\/sites\/15\/2019\/04\/AIR\u00b3-CARRE_Logo.png","contentUrl":"http:\/\/www.fly-air3.com\/wp-content\/uploads\/sites\/15\/2019\/04\/AIR\u00b3-CARRE_Logo.png","width":600,"height":600,"caption":"Berfon SPRL"},"image":{"@id":"https:\/\/www.fly-air3.com\/en\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/FLYAIRCUBE\/"]}]}},"_links":{"self":[{"href":"https:\/\/www.fly-air3.com\/fr\/wp-json\/wp\/v2\/pages\/8926","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.fly-air3.com\/fr\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.fly-air3.com\/fr\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.fly-air3.com\/fr\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.fly-air3.com\/fr\/wp-json\/wp\/v2\/comments?post=8926"}],"version-history":[{"count":34,"href":"https:\/\/www.fly-air3.com\/fr\/wp-json\/wp\/v2\/pages\/8926\/revisions"}],"predecessor-version":[{"id":11132,"href":"https:\/\/www.fly-air3.com\/fr\/wp-json\/wp\/v2\/pages\/8926\/revisions\/11132"}],"up":[{"embeddable":true,"href":"https:\/\/www.fly-air3.com\/fr\/wp-json\/wp\/v2\/pages\/3523"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.fly-air3.com\/fr\/wp-json\/wp\/v2\/media\/4286"}],"wp:attachment":[{"href":"https:\/\/www.fly-air3.com\/fr\/wp-json\/wp\/v2\/media?parent=8926"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}