AIR³ has more than enough memory with 128GB of storage. If you need more storage, you can use an SD card BUT after you insert the card, you will be asked if you want to use the SD card as phone storage or as portable storage. DO NOT select Phone storage with data migration! Otherwise, En savoir plus surPuis-je étendre la mémoire à l'aide d'une carte SD ?[…]
Yes! Of course. Originally designed for flying, AIR³ is also an ideal tool for many other types of outdoor activities. Based on Android, it can run any Android application. This expands the possible uses without limit. If you need a robust instrument, very readable in direct sunlight, with a large autonomy, waterproof, with a very En savoir plus surPuis-je utiliser AIR³ comme système GPS pour la navigation terrestre ?[…]
By default, your contacts will not sync unless you install an app that will allow to sync them. You can either find the Google contacts sync on APKmirror or by following this link. Use the app corresponding to your Android version.
The answer is YES! However, you will need to use an eSIM card to convert the AIR³ into an eSIM compatible unit. The eSIM.me solution has been successfully tested, click here. With such eSIM card, where ever you go, you can easily get an eSIM profile to obtain an internet and/or a local phone number En savoir plus surPuis-je utiliser une eSIM avec AIR³ ?[…]
If you want to test the Fanet&Flarm signal with another device, here are a couple of information to take into account: If you want to make some tests to understand the ins and outs, while not flying, you should first start with XC Guide. XC Guide provides more information about Flarm and Fanet, so that En savoir plus surComment tester le module Fanet/Flarm ?[…]
The following instructions are valid for XCTrack and XC Guide. AIR³ Manager won’t upgrade automatically through Play store. As mentioned in the Software upgrade instructions page, you can upgrade apps manually (watch the video), or automatically via Play store. It may happen that the Play store version is not as recent as the version provided En savoir plus surComment mettre à jour automatiquement mes applications via Play Store ?[…]
Depending on your eyes, you may want to display cities with bigger font.This is how to proceed: Download the Hyperpilot custom xml file here. If you download it from the browser of AIR³, keep your finger on the file for more than one second and select “Save link” in the contextual menu. Make sure the En savoir plus surComment afficher les villes en gros caractères sur la carte ?[…]
Adaptive brightness is a very useful feature of AIR³. It greatly increases autonomy. When the device is exposed to more light, the screen adapts and becomes brighter. When the device receives less light, the screen automatically decreases the brightness and thus reduces power consumption. However, you can disable this feature (for example if the upper En savoir plus surComment désactiver la "luminosité adaptative"?[…]
Since XCTrack 0.9.9.0 (beta) you can directly see the thermal map layer on both XC Map widget or Task Map widget. You can read below, other ways to get such thermal spots out of the kk7 database . These are now considered as “Old way”… 1/ Thermal hotspots 2/ Thermal map 1/ To get the En savoir plus surPuis-je voir la carte thermique et/ou les hotspots sur mon AIR³[…]
To use this feature, you need to configure both the AIR³ (Google account) and a Google Drive (Reading/writing rights for this Google account + Openair files with the right naming) as described in this page . If the configuration is not right, you will get this message.
Français 
English