Since XCTrack 0.9.9.0 (beta) you can directly see the thermal map layer on both XC Map widget or Task Map widget. You can read below, other ways to get such thermal spots out of the kk7 database . These are now considered as “Old way”… 1/ Thermal hotspots 2/ Thermal map 1/ To get the En savoir plus surPuis-je voir la carte thermique et/ou les hotspots sur mon AIR³[…]
To use this feature, you need to configure both the AIR³ (Google account) and a Google Drive (Reading/writing rights for this Google account + Openair files with the right naming) as described in this page . If the configuration is not right, you will get this message.
In the event of a rapid descent with a large change in pressure, you might feel a short moment with the sound of the vario, weaker than usual, while using AIR³ 7.3 or 7.3+. This is due to a significant pressure difference between the inside of the unit and the outside. The pressure will quickly En savoir plus surPourquoi le son du vario est-il plus faible après une descente rapide (7.3) ?[…]
If you want to return the device to its original state when it was new, check this FAQ. AIR³-XCTrack is preconfigured with ideal settings, according to its specificities. AIR³ Manager communicates with XCTrack to set it ideally. Maybe you have made some changes to the interface or to other settings but you actually prefer to En savoir plus surComment réinitialiser XCTrack/AIR³ à ses paramètres par défaut ?[…]
There is no problem with AIR³ 7.1 and AIR³ 7.2. With AIR³ 7.3, the technology is different. There are different technologies used for polarisation. With some polarised glasses, if you use AIR³ in portrait mode, there will be no problem; in landscape mode, the screen will be darker. With other polarised glasses, there will be En savoir plus surAir³ est-il compatible avec des lunettes polarisées ?[…]
With an internet connection, XC Guide is able to get commercial traffic and transfer the data to XCTrack through a TCP link. To know more about this feature and how to configure it, check this VIDEO.Check also more explanation here.
To know more about Fanet, Flarm and Livetracking, check this FAQ… AIR³ 7.3+ or AIR³ 7.35+ has an integrated Fanet and Flarm module. To enable it for flying, you can either enable it with XCTrack, or with XC Guide. WARNING: the module should be activated ONLY with XC Guide or with XCTrack. NOT both. The En savoir plus surActiver Flarm/Fanet sur AIR³ 7.3(5)+ ?[…]
For more details about Flarm, Fanet and Livetracking, check this FAQ. The Flarm module integrated in AIR³ 7.3+ is using 868 MHz data communication frequency currently. The Flarm module integrated in AIR³ 7.3+ V2 and 7.35+ uses all frequencies used by Flarm worldwide. The module selects automatically the right frequency. 868.2-868.4 MHz (Europe, Africa)869.2 MHz En savoir plus surEst-ce que Flarm fonctionne partout ?[…]
Consultez notre tableau comparatif ici…
The level of brightness has a direct influence on both readability and energy consumption and therefore autonomy. If the brightness is set to its maximum, the energy consumption will be maximum and the autonomy minimum. Check this FAQ related to readability. Check this FAQ related to autonomy. Most smartphones or tablets have a low screen En savoir plus surMeilleur niveau de luminosité avec AIR³ ?[…]
Français 
English