AIR³ XCT Addon manual (2)

Zello is a convenient way to communicate with others, similar to radio communication, except it is internet-based.

With AIR³ XCT Addon, you can communicate through Zello using either a XCTrack widget or a button (physical or with a Bluetooth remote control).
Once you have installed Zello and created a Zello account, test first your Zello setup before configuring XCTrack and AIR³ XCT Addon for Zello.

IMPORTANT NOTE: You need to set Zello’s battery optimisation to ‘Unrestricted’ so that it keeps running in the background and can receive communications sent by XCTrack through the AIR³ XCT add-on.

Go to Settings > Apps > Zello > Battery to check this.

To communicate with Zello, you need to have defined the channel or the person you want to talk to. Set it as default to automatically load Zello with this conversation and not forget to start the communication channel you want to talk to.

Once Zello has been set up, go to Settings and click on the Zello Configuration button.

Enabling Zello creates two new automation rules: one triggered by clicking an XCTrack widget (based on an XCTrack intent launcher widget configured with ‘Zello’ as the event name), and one triggered by an XCTrack button intent (based on a hardware button click caught by XCTrack and configured in the key bindings/launch Android intent). Both triggers are combined with the Zello PTT feature.

Select the Expert-Zello profile in AIR³ Manager to automatically generate Zello-related custom widgets.

If you want to be able to use Zello through a BT button in addition or instead of a widget, in XCTrack Preferences/Key bindings, select Launch android intent. Click on the physical button you want to use.

XCTrack will catch this button event and will share it with AIR³ XCT addon.

Clicking on the play button in the automation rule will send an initial call to Zello.

At this stage, Zello should not work.

Then, go to Zello Options. Click on Settings, then Push to Talk buttons.

A new button called ‘Hardware button’ should now be visible (created by clicking on the play button in the automation rule with Zello PTT defined as the task).

Click on the ‘Hardware button’. Change the ‘Push to talk’ button action from ‘Hold to talk’ to ‘Toggle’.

You can now go back to the AIR³ XCT add-on and test the play button again. This time, you should hear the ascending sound indicating the start of your message, and clicking a second time should produce the descending sound indicating the end of your message.
If you do not click a second time within the timeout delay, the app will do it for you.

Note that you can also enable or disable the timeout through a special widget, as defined in the Expert-Zello profile of AIR³ Manager.

Once this is working through the play button in the AIR³ XCT add-on, you can test it directly in XCTrack, either with the Zello widget or the button you have defined.

Thanks to the AIR³ Manager settings, make sure to automatically launch the AIR³ XCT Add-On and Zello on boot, so that everything will work smoothly every time the unit is started.

It is possible to use a Bluetooth headset with Zello while still using the AIR³ speakers for audio output.
Once your Bluetooth headset is connected, go to Android Settings > Sound & vibration on your AIR³, click on ‘Play AIR³ XCT Add-on’ and select ‘This phone’.

Then open Zello and select the group you want to use. In the bottom left corner, click on ‘Audio device’ and select ‘Bluetooth’.

When talking through Zello, it is recommended that you turn off the Vario sound temporarily to avoid interference.

In order to use the telegram tasks (Send your position, send a message to a telegram group, sendTelegram message and position), the pilot name must be filled in. Once you have added your pilot name, you will have the opportunity to proceed with the Telegram authentication. Follow the steps and send /start to the Telegram bot to finish the authentication.

Once you have finished the authentication, you can add or modify a message to send through Telegram. Read on to find out how to use predefined messages in Telegram tasks.

Before setting up a task to send a message, your location or both via Telegram, you will need to configure a chat with the Telegram bot and activate it.

Click on ‘Configure Chats’. Click on Add a New Chat.

If you have not yet added the bot to a chat, click ‘Add bot to chat’. Please note that you require admin permission for the Telegram group in order to add the bot.

Select the relevant chat and click on the ‘v’ in the top right corner to add the bot. Click on ‘Add Bot’.
Click on the ‘/’ on the right to list the commands, then click on ‘/start’.

If you only want to activate a chat that already has the bot, click on ‘Select chat with bot’. Select the relevant chat. Click on the ‘/’ on the right to list the commands, then click on ‘/start’.

Once you return to the ‘Configure chats’ page, you will see the newly configured chat in the ‘Available chats’ list.

Select it by clicking on it, then click on ‘Add Selected Chat’. The chat will then appear in the ‘Configured Chats’ list. It is now available for selection in Telegram tasks.

To send a message to a Telegram group, click on ‘Send message to Telegram’.

Select the chat to which you want to send the message.

Select the preconfigured message that you want to send, then click ‘Confirm’.

A new task will be created. Go back to the ‘Settings & Tasks’ setup screen and you will see this new task in the configured tasks.
To create a new automation rule, go to the main screen where you can define an automation rule, click on ‘Telegram’, then the ‘+’ sign. After selecting the event that is supposed to trigger the task, you will be able to select this new task by clicking ‘Select task’.

To send your location to a Telegram group, click on ‘Send position to Telegram’.

Select the chat to which you want to send your position.

Click ‘Confirm’.

A new task will be created. Go back to the ‘Settings & Tasks’ setup screen and you will see this new task in the configured tasks.
To create a new automation rule, go to the main screen where you can define an automation rule, click on ‘Telegram’, then the ‘+’ sign. After selecting the event that is supposed to trigger the task, you will be able to select this new task by clicking ‘Select task’.

To send a message  and your location to a Telegram group, click on ‘Send Message & Position to Telegram’.

Select the chat to which you want to send the message and your position.

Select the preconfigured message that you want to send.

Click ‘Confirm’.

A new task will be created. Go back to the ‘Settings & Tasks’ setup screen and you will see this new task in the configured tasks.
To create a new automation rule, go to the main screen where you can define an automation rule, click on ‘Telegram’, then the ‘+’ sign. After selecting the event that is supposed to trigger the task, you will be able to select this new task by clicking ‘Select task’.

The Safe Landing Reporting feature allows you to send a message and your location to a specific Telegram chat if you do not report that you have landed safely. To be able to select it in the Safe Landing Reporting configuration, make sure you have configured at least one task called ‘Send Message & Position to Telegram’.